Sharp CD-SW300H Specifications download pdf (Page 46)

1/3/07 CD-SW330HE_EN.fm

TINSZA165AWZZ

CD-SW330H

CD-SW300H

References

Maintenance

 Cleaning the tape-handling parts

 Dirty heads, capstans or pinch rollers can cause poor sound and

tape jams. Clean these parts with a cotton swab moistened with

commercial head/pinch roller cleaner or isopropyl alcohol.

 When cleaning the heads, pinch rollers, etc., unplug the unit which

contains high voltages.

 After long use, the deck's heads and capstans may become

magnetised, causing poor sound. Demagnetise these parts once

every 30 hours of playing/recording time by using a commercial

tape head demagnetiser. Read the demagnetiser's instructions

carefully before use.

 Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth and a diluted soap

solution, then with a dry cloth.

Caution:

 Do not use chemicals for cleaning (petrol, paint thinner, etc.). It

may damage the cabinet finish.

 Do not apply oil to the inside of the unit. It may cause

malfunctions.

 Cleaning the CD pickup lens

Poor performance during CD playback (skipping or jumping) can be

caused by a dirty or contaminated CD laser pick up lens. If this

happens then the use of a commercially available CD lens cleaning

discs may restore normal operation. Contact your supplier or local

CD software dealer to obtain CD lens cleaning discs. Ensure all

included instructions/documentation are carefully followed.

Specifications

As part of our policy of continuous improvement, SHARP reserves

the right to make design and specification changes for product

improvement without prior notice. The performance specification

figures indicated are nominal values of production units. There may

be some deviations from these values in individual units.

 General

* This power consumption value is obtained when the demonstration

mode is cancelled in the power stand-by mode. Refer to page 12 to

cancel the demonstration mode.

 CD player

 Tuner

Playback head Erase head

Capstans Recording/Playback head

Pinch rollers

TAPE 1

TAPE 2

Power source AC 230 V, 50 Hz

Power consumption

CD-SW300H

Power on: 225 W

Power stand-by: 0.6 W (*)

Power consumption

CD-SW330H

Power on: 235 W

Power stand-by: 0.6 W (*)

Dimensions Width: 260 mm (10-1/4")

Height: 330 mm (13")

Depth: 323 mm (12-7/8")

Weight 10 kg (22 lbs.)

Type 5-disc multi-play compact disc player

Signal readout Non-contact, 3-beam semiconductor laser

pickup

D/A converter 1-bit D/A converter

Frequency

response

20 - 20,000 Hz

Dynamic range 90 dB (1 kHz)

Frequency range FM: 87.5 - 108.0 MHz

AM: 522 - 1,620 kHz

1 2 ... 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments

Sharp CD-SW300H Specifications Page 46

Comments to this Manuals

Related products and manuals for Cassette players Sharp CD-SW300H