Sharp CD-SW300H Specifications download pdf (Page 43)

1/3/07 CD-SW330HE_EN.fm

TINSZA165AWZZ

CD-SW330H

CD-SW300H

References

 Headphones

 Before plugging in or unplugging the headphones, reduce the

volume.

 Be sure your headphones have a 3.5 mm (1/8") diameter plug and

impedance between 16 and 50 ohms. The recommended

impedance is 32 ohms.

 Plugging in the headphones disconnects the speakers

automatically. Adjust the volume using the VOLUME control.

Troubleshooting chart

Many potential problems can be resolved by the owner without

calling a service technician.

If something is wrong with this product, check the following before

calling your authorised SHARP dealer or service centre.

 General

 CD player

Symptom Possible cause

 The clock is not set to the

correct time.

 Did a power failure occur? Reset

the clock. (Refer to page 15.)

 When a button is pressed,

the unit does not respond.

 Set the unit to the power stand-

by mode and then turn it back on.

 If the unit still malfunctions, reset

it. (Refer to page 45.)

 No sound is heard.  Is the volume level set to “0”?

 Are the headphones connected?

 Are the speaker wires discon-

nected?

Symptom Possible cause

 Playback does not start.  Is the disc loaded upside down?

 Playback stops in the mid-

dle or does not performed

properly.

 Does the disc satisfy the stan-

dards?

 Is the disc distorted or

scratched?

 Playback sounds are

skipped, or stopped in the

middle of a track.

 Is the unit located near excessive

vibrations?

 Is the disc very dirty?

 Has condensation formed inside

the unit?

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments

Sharp CD-SW300H Specifications Page 43

Comments to this Manuals

Related products and manuals for Cassette players Sharp CD-SW300H