Sharp UP-820N Instruction Manual download pdf (Page 3)

— 1 —

BATTERY DISPOSAL

Contains Nickel Metal Hydride Battery. Must be Disposed of Properly.

Contact Local Environmental Officials for Disposal Instructions.

INTRODUCTION

Thank you very much for your purchase of the SHARP POS Terminal Model UP-820N. Please read this Manual

carefully before operating your POS terminal in order to gain full understanding of functions and features.

Please keep this manual for future reference. It will help you if you encounter any operational problems.

IMPORTANT

Avoid installing this terminal in a location that may be subjected to direct radiation, unusual

temperature changes, and high humidity or exposure to water or other liquids.

Installation in such a location could cause damage to the cabinet and the electronic components.

Do not operate this terminal with wet hands.

This may cause damage to the terminal.

Do not apply excessive pressure to the display. Do not use a sharp-pointed object on the display.

This may cause damage to the LCD.

When cleaning this terminal, use a dry, soft cloth. Never use solvents, such as benzene or thinner.

The use of such chemicals will lead to discoloration or deterioration of the cabinet.

The terminal plugs into any standard wall outlet (120V ± 10% AC) with a dedicated earth-ground.

Other electrical devices on the same electrical circuit could cause the terminal to malfunction.

If the terminal malfunctions, call your local authorized dealer for service. Do not try to repair the

terminal yourself.

For a complete electrical disconnection, remove the AC power cord from the wall outlet.

This POS terminal uses a nickel metal hydride battery pack for memory protection.The battery

pack must be replaced at least every three years at the user's expense. For replacement of the

battery pack, please consult your authorized SHARP dealer.

PRECAUTION

This POS terminal has a built-in memory protection circuit which is operated by a rechargeable battery pack.

It should be known that all batteries will, in time, dissipate their charge even if not used. Therefore to insure

an adequate initial charge in the protection circuit and to prevent any possible loss of memory upon

installation, it is recommended that each unit be allowed to be charged for a period of 24 to 48 hours prior to

use by the customer.

In order to charge the battery pack, the machine must be plugged in . This charging precaution can prevent

unnecessary initial service calls.

This product utilizes tin-lead solder, and fluorescent lamp containing a

small amount of mercury.

Disposal of these materials may be regulated due to environmental

considerations.

For disposal or recycling information, please contact your local authori-

ties, the Electronics Industries Alliance: www.eiae.org, the lamp

recycling organization: www. lamprecycle. org or Sharp at 1-800-BE-

SHARP

(For U.S.A only)

1 2 3 4 5 6 7 8 ... 276 277

Comments to this Manuals

No comments

Sharp UP-820N Instruction Manual Page 3

Comments to this Manuals

Related products and manuals for Cash registers Sharp UP-820N