Sharp VL-MC500U Service Manual download pdf (Page 8)

VL-MC500U/K

4. DISASSEMBLY OF THE SET

Note:

Before removing the cabinet, turn off the power supply, and ascertain that the battery have been removed.

(d)

(c)

Battery Unit

(d)

Speaker Wire Connect

LCD Panel

FPC

(d)

Tillt FPC

connector

FPC

Main PWB

Inverter PWB

(d)

1) Detach the battery unit.

2) Remove the three screws ((d)XiPSN17P03000).

3) Remove the one screw ((c)LX-HZ0050TAFN).

4) Detach the LCD cabinet in the direction of the arrow.

1) Remove the two screws ((d)XiPSN17P03000).

2) Disconnect the speaker wire connector.

3) Detach the side cover in the direction of the arrow.

1) Remove the FPC of the LCD panel, and detach the LCD panel

in the direction of the arrow.

1) Remove the four screws ((d)XiPSN17P03000), the tilt FPC

and the tilt wire connector to detach the lens section.

2) Remove the two screws ((d)XiPSN17P03000) to detach the

main PWB.

3) Remove the one screw ((d)XiPSN17P03000) and the FPC to

detach the inverter PWB.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 115 116

No comments

Sharp VL-MC500U Service Manual Page 8