Sharp CD-E250E Installation Guide download pdf (Page 11)

MN-748

Some late models are equipped with the RSC (roll stability control) system (g. 16). On

these models it will be necessary to loosen the axle vent tube bolt and rotate the brake

line junction box counter clockwise as far as it will let you. Tighten the axle vent tube bolt

securely (g. 17).

3. Secure the lower bracket to the axle using the saddle clamps (G), at washers (K) and

3/8” nuts (J). See g. 18.

4. Torque the nuts to 16 ft-lbs (g. 18). Trim excess bolt off if desired.

g. 15

NOTE

g. 17

g. 18

g. 16

Rotate Counter

Clockwise

Axle Vent

Tube Bolt

LoadLifter 5000

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

No comments

Sharp CD-E250E Installation Guide Page 11