Sharp AR-M236 User Manual download pdf (Page 20)

BEFORE USING THE MACHINE

Loading paper in the bypass tray

Unfold the bypass tray.

To enable correct

detection of the paper

size, be sure to pull out

the bypass tray

extension.

Set the paper guides to the copy

paper width.

Insert the copy paper (print side

down) all the way into the bypass tray.

Important points when inserting paper in the bypass tray

• Be sure to place envelopes horizontally as shown in

the following diagram.

• Load the paper with the print side facing down.

• When loading envelopes, make sure that they are

straight and flat and do not have loosely glued

construction flaps (not the closure flap).

• When adding paper, first remove any paper

remaining in the bypass tray, combine it with the

paper to be added, and then reload as a single

stack. The paper to be added must be the same size

and type as the paper already in the bypass tray.

• Do not use paper that is smaller than the original

image. This may cause smudges or unclean images.

• Do not use paper that has already been printed on

by a laser printer or plain paper fax machine. This

may cause smudges or unclean images.

Landscape

orientation

Portrait

orientation

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 99 100

Leah Tsado 22 Aug 2025 | 11:25:01

Help

Sharp AR-M236 User Manual Page 20