Sharp AN-LS1 Specifications download pdf (Page 10)

Connecting the AC Adaptor

Take the following steps to connect AN-LS1’s AC adaptor.

1 Plug the AC adaptor’s DC plug into AN-LS1’s DC IN jack.

2 Plug the AC adaptor into wall outlet.

To wall outlet

• There is no on/off switch. AN-LS1 turns on as soon as the connected AC adaptor is plugged into

a wall outlet. The POWER LED indicator on AN-LS1’s top panel will light green to indicate that it

is receiving power.

CAUTION

• The AC adaptor may interfere with reception if used near a radio.

• Prevent flammables, liquids, and metal objects from entering the AC adaptor.

• The AC adaptor is a sealed unit. Do not attempt to open or modify it.

• Do not damage, drop, or subject the AC adaptor to vibration.

• Do not leave the AC adaptor in direct sunlight.

• Avoid using the AC adaptor in humid or extremely hot places.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 53 54

No comments

Sharp AN-LS1 Specifications Page 10