Sharp MD-MT88H Specifications download pdf (Page 39)

01/4/4 88UK_5.fm

Advanced Features

-Titling a MiniDisc-

Note:

If the total number of tracks on the master MiniDisc does

not match that on the MiniDisc for stamping, the unit will

display "Can'tSTAMP" and turn off the power.

If this happens, adjust the total number of tracks on the

newly recorded MiniDisc using the edit operation.

Master MiniDisc operation

Insert a Master MiniDisc.

Do not mistake the Master MiniDisc for the target

one.

Whilst in the stop mode, press the EDIT

button to select "NAME STAMP".

Press the ENTER/SYNC button.

To cancel the operation, press the /:OFF button.

Press the ENTER/SYNC button again.

When the unit displays "CHANGE MD", re-

move the master MiniDisc.

Remove it without turning off the power. Or, the op-

eration will be cancelled.

Operation of the MiniDisc for stamping

Load a MiniDisc for stamping.

Press the ENTER/SYNC button.

The unit will finish recording the character informa-

tion and enter the stop mode.

Web-site:

www.sharp.co.uk/support

Help Line:

08705 274277 (office hours)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

No comments

Sharp MD-MT88H Specifications Page 39