Sharp MD-MT877 User Manual download pdf (Page 16)

Preparation

– Hold Function –

Hold Function

The present operation condition can be kept even if other buttons are accidentally pressed in a place such

as a crowded train.

To cancel the hold mode

Move the HOLD switch away from the safety posi-

tion (the opposite direction of the arrow).

If the hold function is active while the power is

turned off, the power cannot be turned on by mis-

take and the battery will not be drained.

If the battery is inserted or the AC adaptor is connected,

you can set this function even when the power is turned

off.

To cancel the hold mode

Press and hold down the • ■ / –HOLD button for 2 sec-

onds or more while the unit is in the hold mode.

● “HOLD OFF” will be shown.

Hold Release

Press the • ■ / –HOLD button for 2 seconds

or more.

Move the HOLD switch to the safety position

(direction indicated by the arrow).

Orange mark

Remote control unit

Main unit

Hold

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

No comments

Sharp MD-MT877 User Manual Page 16