Sharp R-309J User Manual download pdf (Page 3)

HAND-HELD THERMOMETER

Heat-Prober

TCM312 Meter

(800) 421-2853 • FAX (828) 658-0728

TCM312 Heat-Prober

Type J, E, T or K Thermocouple Meter

SPECIFICATIONS

Model

Type K Range

Type J Range

Type E Range

Type T Range

Resolution

Meter Accuracy

Power

Display

Meter Size

TM400

-58/1999°F and -50/1300°C

N/A

Switchable 1° or 0.1°, °F or °C

At -58 to 1832°F (-50 to 1000°C):

±0.3% reading, +2°F (1°C)

At 1832 to 1999°F (1000 to 1300°C):

±0.5% reading, +2°F (1°C)

Four 1.5V (AAA, UM-4, RO3) batteries

3-1/2 Digit LCD

6-5/8" H, 1-5/8" W, 1-3/4" D

(166mm X 41mm X 44mm)

The lightweight Heat-Prober Meter TCM312

is especially useful for laboratory and

scientific applications. Microprocessor

programming allows manual or automatic

field calibration of any Type J, K, E, or T

type probe. Calibration is retained

indefinitely–even if the unit is turned off or

the battery removed.

The membrane keypad provides user

selection of thermocouple type, °F or°C, 1°

or 0.1° resolution, maximum/minimum

temperature readings and single probe

temperature differential measurements. The

TCM312 will store up to eight temperature

readings for later recall.

Use the TCM312 with any Wahl Type K

thermocouple probes on pages 16-18, or

with Type J, T or E probes listed below.

TM500

-328/2498°F and -200/1370°C

-328/1922°F and -200/1050°C

N/A

0.1°, °F or °C

At -58 to 2498°F (-50 to 1370°C):

±0.05% reading, +0.6°F (0.3°C)

At -58 to -328°F (-50 to -200°C):

±0.05% reading, +1.4°F (0.7°C)

One standard 9V, NEDA 1604 or equiv..

5 Digit LCD

7-1/2" H, 3-5/8" W, 2-1/8" D

(190mm X 92mm X 54mm)

TCM312

-418/2500°F and -250/1375°C

-310/1832°F and -190/1000°C

-418/1832°F and -250/1000°C

-418/752°F and -250/400°C

Switchable 1° or 0.1°, °F or °C

±0.1% reading, ± 0.8°F (0.4°C) at

above -238°F (-150°C)

One standard 9V, NEDA 1604 or equiv.

3-1/2 Digit LCD

6" H, 3" W, 1" D

(152mm X 76mm X 25mm)

See also “comparative” specifications chart on page 13

Type J, T, E Thermocouple Interchangeable Probes

Most Type K special application probes listed on pages 16 and 17 can be produced using J, T, or E

thermocouple sensors. Consult the factory for specifications, availability and pricing.

TCL-301J Type J T/C gen. purpose immersion probe w/handle, 8" shank

TCL-301T Type T T/C gen. purpose immersion probe w/handle, 8" shank

TCL-301E Type E T/C gen. purpose immersion probe w/handle, 8" shank

TCL-309J Type J T/C set: TCL-383J probe with TCL-329J handle

TCL-309T Type T T/C set: TCL-383T probe with TCL-329T handle

TCL-309E Type E T/C set: TCL-383E probe with TCL-329E handle

TCL-329J Type J T/C extension handle with probe connector

TCL-329T Type T T/C extension handle with probe connector

TCL-329E Type E T/C extension handle with probe connector

TCL-363J Type J T/C 3' unmounted bare sensor, exposed junction

TCL-363T Type T T/C 3' unmounted bare sensor, exposed junction

TCL-363E Type E T/C 3' unmounted bare sensor, exposed junction

TCL-383J Type J T/C immersion probe, 8" shank, no handle

TCL-383T Type T T/C immersion probe, 8" shank, no handle

TCL-383E Type E T/C immersion probe, 8" shank, no handle

MADE

IN THE

USA

TWO YEAR

WARRANTY

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Sharp R-309J User Manual Page 3

Comments to this Manuals

Related products and manuals for Microwaves Sharp R-309J