Sharp LC-32SB28UT-A Operations Instructions download pdf (Page 27)

Appendix

Problem Possible Solution

• No power • Check if you pressed POWER on the remote control unit. (See page 13.) If the

indicator on the TV does not light up, press POWER on the TV.

Is the AC cord disconnected? (See page 7.)

Has the power been turned on? (See page 13.)

• Unit cannot be operated. • External influences such as lightning, static electricity, may cause improper operation.

In this case, operate the unit after first turning off the power of the TV or unplugging

the AC cord and re-plugging it after 1 or 2 minutes.

Remote control unit does not = Is the SOURCE set correctly? Set it to the TV setting position.

operate. = Are batteries inserted with polarity (÷, -) aligned? (See page 8.)

Are batteries worn out? (Replace with new batteries.)

Are you using it under strong or fluorescent lighting?

• Is a fluorescent light illuminated near the remote control sensor?

Picture is cut off/with sidebar = Are screen mode adjustments such as picture size made correctly? (See page 17-

screen. 18.)

Strange color, light color, or color = Adjust the picture tone. (See page 21 .)

misalignment • Is the room too bright? The picture may look dark in a room that is too bright.

Check the input signal setting. (See page 25.)

Power is suddenly turned off. = Is the sleep timer set? (See page 15.)

The unit's internal temperature has increased. Remove any objects blocking vent.

No picture • Is connection to other components correct? (See page 12.)

Is correct input signal source selected after connection? (See page 15.)

Is the correct input selected? (See page 15.)

Is picture adjustment correct? (See page 21 .)

No sound = Is the volume too low? (See page 15.)

Have you pressed MUTE on the remote control unit? (See page 15.)

• The TV sometimes makes a • This is not a malfunction. This happens when the cabinet slightly expands and

cracking sound, contracts according to change in temperature. This does not affect the TV's

performance.

Cautions regarding use in high and low temperature environments i

When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear I

slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. I

Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight I

or near a heater, as this _ay caUSeothecabinet to deform and the Liquid Crystal panel to malfunction. I

Storage temperature: -4 F to +140 F (-20 C to +60 C) J

(D- 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

No comments

Sharp LC-32SB28UT-A Operations Instructions Page 27