Sharp LC-22LE250K Specifications download pdf (Page 13)

English - 12 -

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC 50 Hz.

Switch the “

” button on the bottom right hand side

under the screen to position “|” so the TV will switch

to standby mode. Then the standby LED lights up.

To switch on the TV from standby mode either:

• Press the “ ” button, P+ / P- or a numeric button

on the remote control.

• Press and hold the control switch on the left hand

side of the TV.

The TV will then switch on.

Note: If you switch on your TV via P+ / P-buttons on the remote

control or P/CH+/- on the TV set, the programme that you

were watching last will be reselected.

To Switch the TV to Standby

To switch the TV to low power stand by press the “

” button on the remote control or press and hold the

control switch on the left hand side of the TV.

Note: When the TV is switched to standby mode, standby LED

can blink to indicate that features such as Standby Search,

Over Air Download or Timer is active.

To Switch the TV Off

Switch the “ ” button on the bottom right hand side

under the screen to position 2 as illustrated,

, so

the TV will switch off.

To power down the TV completely, unplug the power

cord from the mains socket.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK.

The First Time Installation (FTI) screen will be

displayed next. Set your preferences using the

navigation buttons and when nished, press OK to

continue.

You can activate Store mode option to be available

in “Other settings” menu and your TV’s features will

be illustrated on the top of the screen. a conrmation

screen will be displayed. Select YES to proceed.

If Home Mode is selected, Store mode will not be

available after the First Time Installation. Press OK

button to continue.

Aerial Installation

If you select AERIAL option from the Search Type screen,

the television will search for digital terrestrial TV broadcasts.

NOTE: You can press MENU button to cancel.

After all the available stations are stored, the Channel

List will be displayed on the screen. If you like how the

channels are sorted according to the LCN (*), please

select “Yes” and than press OK.

Press MENU button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that

organizes available broadcasts in accordance with a

recognizable channel sequence (if available).

Cable Installation

If you select CABLE option and press OK button on the

remote control. To continue, please select YES and

press OK. To cancel operation, select NO and press

OK. You can select frequency ranges from this screen.

Enter the frequency range manually by using the

numeric button.

Note: Searching duration will change depending on

the selected search step.

Media Playback via USB Input

You can connect a 2.5” and 3.5” inch (hdd with external

power supply) external hard disk drives or USB memory

stick to your TV by using the USB inputs of the TV.

IMPORTANT! Back up your les before making

any connections to the TV. Manufacturer will not

be responsible for any le damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32

and NTFS disk formatting but recording will not be

available with NTFS formatted disks.

While formatting a USB hard disk that has 1TB (Tera

Byte) or more le capacity, you can experience

problems with the formatting process. Do not

repeatedly quickly plug and unplug the drive. This

may cause physical damage to the USB player

and USB device itself. Do not pull out USB module

while playing a le.

Recording a Programme

IMPORTANT: When using a new USB hard disk drive,

it is recommended that you rst format the disk using

your TV’s “Format Disk” option.

Note : To record a programme, you should first

connect a USB disk to your TV while the TV is

switched off. You should then switch on the TV to

enable the recording feature.

To use the recording function, you need to connect

a USB disk or an external hard disk drive to the TV

and the connected USB disk should have at least 1

GB capacity and should have 2.0 speed compatibility.

If the connected USB device does not support 2.0

speed, an error message will be displayed.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 26 27

Comments to this Manuals

No comments

Sharp LC-22LE250K Specifications Page 13

Comments to this Manuals

Related products and manuals for LCD TVs Sharp LC-22LE250K