Sharp FO-10 Specifications Page 87

  • Download
  • Add to my manuals
  • Print
  • Page
    / 198
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 86
Problems and Solutions
86
Dialling and transmission problems
Problem Solution
No dial tone when you
pick up the handset.
Make sure the handset cord is connected to the
correct socket. See
Connecting the handset
in
Connections
in Chapter 1.
Dialling is not possible. Make sure the power cord is properly plugged into
a power outlet.
Make sure that the telephone line is properly
connected to both the
TEL. LINE
socket and the
wall socket.
Make sure that the fax machine is set to the correct
dialling mode for your telephone line. See
Connecting the telephone line cord
in
Connnections
in Chapter 1.
The power is on, but no
transmission takes place.
Make sure that the receiving machine has paper.
Make sure that the telephone line cord is plugged
into the
TEL. LINE
socket, and not the
TEL. SET
socket.
If the receiving machine is in manual mode with no
attendant, reception will not be possible.
Check the display for error messages.
Pick up the handset and check for a dial tone.
Nothing is printed at the
receiving end.
Make sure that the document for transmission is
placed face down in the feeder.
A distorted image is
received at the other end.
Noise on the telephone line may cause distortion.
Try sending the document again.
Make a copy of the document on your fax machine.
If the copy is also distorted, your fax machine may
need service.
all-fo50hk.book Page 86 Thursday, August 26, 1999 4:15 PM
Page view 86
1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 197 198

Comments to this Manuals

No comments