Sharp Notevision XG-C335X Specifications Page 10
- Page / 71
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
-8
Ensure that you read the following safeguards when
setting up your projector.
Caution concerning the lamp unit
■ Potential hazard of glass par-
ticles if lamp ruptures. In case
of lamp rupture, contact your
nearest Sharp Authorized Pro-
jector Dealer or Service Cen-
ter for replacement.
See “Replacing the Lamp” on
page 60.
Caution concerning the setup of the pro-
jector
■ For minimal servicing and to maintain high
image quality, SHARP recommends that this
projector be installed in an area free from hu-
midity, dust and cigarette smoke. When the
projector is subjected to these environments,
the vents and lens must be cleaned more
often. As long as the projector is regularly
cleaned, use in these environments will not
reduce the overall operation life of the unit.
Internal cleaning should only be performed
by a Sharp Authorized Projector Dealer or
Service Center.
Do not set up the projector in places ex-
posed to direct sunlight or bright light.
■ Position the screen so that it is not in direct
sunlight or room light. Light falling directly on
the screen washes out the colors, making
viewing difficult. Close the curtains and dim
the lights when setting up the screen in a
sunny or bright room.
The projector may be safely tilted to a
maximum angle of 9 degrees.
■ Placement should be within ±9 degrees of
horizontal.
When using the projector in high-altitude
areas such as mountains (at altitudes of
approximately 1,500 meters (4,900 feet)
or more)
■ When you use the projector in high-altitude
areas with thin air, set “Fan Mode” to “High”.
Neglecting this can affect the longevity of the
optical system.
Warning about placing the projector in a
high position
■ When placing the projector in a high posi-
tion, make certain it is carefully secured to
avoid personal injury caused by the projec-
tor falling down.
Do not subject the projector to hard im-
pact and/or vibration.
■ Ta ke care with the lens so as not to hit or
damage the surface of the lens.
Rest your eyes occasionally.
■ Continuously watching the screen for long
hours will cause eye strain. Take regular
breaks to rest your eyes.
Avoid locations with extremes of tem-
perature.
■ The operating temperature of the projector
is from 41°F to 95°F (+5°C to +35°C).
■ The storage temperature of the projector is
from –4°F to 140°F (–20°C to +60°C).
Do not block the intake and exhaust
vents.
■ Allow at least 7
7
/8 inches (20 cm) of space
between the exhaust vent and the nearest
wall or obstruction.
■ Ensure that the intake vent and the exhaust
vent are not obstructed.
■ If the cooling fan becomes obstructed, a pro-
tection circuit will automatically put the pro-
jector into standby mode to prevent overheat
damage. This does not indicate a malfunc-
tion (see pages 58 and 59). Remove the pro-
jector power cord from the wall outlet and wait
at least 10 minutes. Place the projector where
the intake and exhaust vents are not blocked,
plug the power cord back in and turn on the
projector. This will return the projector to the
normal operating condition.
CAUTION
PRECAUCIÓN
PRÉCAUTION
IMPORTANT SAFEGUARDS
- XG-C430X 1
- XG-C335X 1
- XG-C330X 1
- Model No.: 2
- Serial No.: 2
- WARNING: 4
- PRODUCT DISPOSAL 4
- Pages 64 and 65 5
- Contents 6
- Reference 7
- SETUP MANUAL 7
- IMPORTANT SAFEGUARDS 9
- PRECAUCIÓN 10
- PRÉCAUTION 10
- Introduction 11
- Other connected equipment 11
- Temperature monitor function 11
- Optional accessories 12
- Lens cap strap 12
- UBNDTA017WJZZ 12
- 64" (15 cm)) 12
- Throw Distance 13
- Part Names and Functions 14
- Projector (Rear View) 15
- Remote Control 16
- Using the Remote Control 17
- Quick Start 18
- 4. Adjust the angle 19
- 7. Turn the Power off 19
- 6. Select the INPUT mode 19
- Setting Up the Projector 20
- Projection (PRJ) Mode 21
- Storing the Projector 22
- Connections 23
- Connecting to a Computer 25
- Connecting to Video Equipment 27
- Computer 30
- Turning the Projector On/Off 32
- Image Projection 33
- 3 Press 34
- Adjusting the Lens 35
- Switching the INPUT 36
- 2 Press 37
- Displaying and Setting the 38
- Break Timer 38
- Switching the Eco/Quiet 38
- Selecting the Picture Mode 38
- Resize Mode 39
- Connecting with a USB cable 41
- Main Menu 42
- Main Menu Sub Menu 43
- Using the Menu Screen 44
- 1 Press MENU 44
- 4 Press 45
- 5 Press MENU 45
- Useful Features 47
- Checking the Input Signal 48
- Using the “Options1” Menu 49
- Setting/Changing the keycode 51
- Direct Power On Function 52
- Setting a Password 53
- If You Forget Your Password 53
- Selecting the Transmis 54
- 3 Enter “IP Address” using 55
- 4 Enter “Subnet Mask” using 55
- 5 Enter “Gateway” using 55
- Menu operation Page 42 56
- Maintenance 57
- Replacing the Air Filter 58
- 2 Disconnect the power cord 58
- 3 Remove the filter cover 58
- 4 Remove the air filter 58
- 6 Replace the filter cover 59
- Maintenance Indicators 60
- Appendix 61
- Regarding the Lamp 62
- 1 Press STANDBY/ON on the 63
- 3 Remove the lamp unit cover 63
- 4 Remove the lamp unit 63
- 5 Insert the new lamp unit 64
- 1 Connect the power cord 64
- 2 Reset the lamp timer 64
- Computer Compatibility Chart 65
- Troubleshooting 66
- For SHARP Assistance 68
- Specifications 69
- SHARP CORPORATION 71
Related products and manuals for Data projectors Sharp Notevision XG-C335X
Data projectors Sharp PG-A20X Specifications
(74 pages)
(74 pages)
Data projectors Sharp PG-LW3500 Setup Guide
(77 pages)
(77 pages)
Data projectors Sharp DT-200 Specifications
(67 pages)
(67 pages)
Data projectors Sharp XV-Z100 Specifications
(65 pages)
(65 pages)
(103 pages)
Data projectors Sharp PG-D2510X Setup Guide
(76 pages)
(76 pages)
Electrolux ESF2440 manuels
Manuels d'utilisation et guides de l'utilisateur pour Accessoires pour mélangeurs/transformateurs d'aliments Electrolux ESF2440.
Nous fournissons des manuels en pdf 3 Electrolux ESF2440 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comments to this Manuals