INSTALLATION REQUIREMENTSSUPPLIESTO THE ADMINISTRATOR OF THE MACHINESPECIFICATIONSDIGITAL FULL COLOR PRINTERPlease read firstPlease read this guide fi
8CAUTIONSLaser informationWave length 790 nm ± 10 nmPulse times(North America and Europe)4.1 µs ± 4.1 ns / 7 mmOutput power Max 0.6 mW (LD1+ LD2)Cauti
9INSTALLATION REQUIREMENTSThe performance of the machine is affected by the ambient conditions of the installation location. Do not install in the fol
10INSTALLATION REQUIREMENTSDusty locationsIf dust enters the machine, dirty output and machine failure may result.Locations exposed to direct sunlight
11SUPPLIESStandard supplies for this product that can be replaced by the user include paper, toner cartridges, and staple cartridges for the finisher.
12SPECIFICATIONSMachine specifications*1 When the machine is used as a PostScript printer.*2 When the XPS expansion kit is installed.*3 Barcode font k
13SPECIFICATIONSMachine specifications (Continued)* First print out time is the time from when the machine starts printing operation until the print i
14SPECIFICATIONSMachine specifications (Continued)* Type A connectors are located on the front and back right of the machine (two connectors); however
15SPECIFICATIONSMachine specifications (Continued)Required power supplyAC 120 V ±10% 60 HzPower consumption1.44 kWDimensions22-3/64" (W) x 17-1/4
16SPECIFICATIONSContinuous printing speeds** Print speed during output of the second print and following prints when performing continuous one-sided p
17SPECIFICATIONSAcoustic noise emission (measurement according to ISO7779)Chemical emission (measured according to RALUZ122: Edition Jun. 2006)Sound p
Notice for Users in U.S.A.EMC (this machine and peripheral devices)NOTE:This equipment has been tested and found to comply with the limits for a Class
18SPECIFICATIONS500-sheet paper feed unit specifications* Only MX-CSX1 can be used.ModelMX-CSX1 (tray 2) MX-CSX2 (tray 3, tray 4)Paper sizes8-1/2"
19SPECIFICATIONSFinisher specificationsModelMX-FN12Paper sizes8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2&qu
20SPECIFICATIONSFinisher specifications (Continued)*1 The maximum number of sheets that can be held varies depending on ambient conditions in the inst
21Information that the administrator of the machine requires is printed on the back of this page.(Separate this page from the manual and keep it in a
22TO THE ADMINISTRATOR OF THE MACHINE(Separate this page from the manual and keep it in a safe place.)Factory default passwordsWhen accessing the syst
23TO THE ADMINISTRATOR OF THE MACHINEMX-C400P Digital Full Color PrinterNOTICE for users in the USAIn the event that this authorized dealer does not
24TO THE ADMINISTRATOR OF THE MACHINETrademark acknowledgmentsThe following trademarks and registered trademarks are used in conjunction with the mach
mxc400p_us_saf.book 25 ページ 2009年10月5日 月曜日 午後1時53分
DIGITAL Please Please readuse of the mBefore instaread the "TMACHINE"REQUIREMKeep this mafor referenceSafeSafety GuideSafeMX-C400P Safety Gu
1ContentsCAUTIONS . . . . . . . . . . . . . . . . . 3Laser information . . . . . . . . . . . . 8INSTALLATION REQUIREMENTS . . . 9SUPPLIES. . . . . .
2WarrantyWhile every effort has been made to make this document as accurate and helpful as possible, SHARP Corporation makes no warranty of any kind w
3CAUTIONSSymbols in this manualTo ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explai
4CAUTIONSWARNINGDo not insert or remove the power plug with wet hands.This may cause electrical shock.Do not use a flammable spray to clean the machin
5CAUTIONSCAUTIONDo not throw toner, a toner container (toner cartridge), or a waste toner box into a fire.Toner may fly and cause burns.Do not install
6CAUTIONSCAUTIONWhen moving the machine, switch off the main power and remove the power plug from the outlet before moving.The cord may be damaged, cr
7CAUTIONSThe machine includes the print hold function, which stores document image data on the machine's hard drive. Stored documents can be call
Comments to this Manuals