Sharp AR-NB2 Setup Guide Page 1

AR-NB2AR-NB2 NMODELNETWORK EXPANSION KITSOFTWARE SETUP GUIDE(for network printer)Page• SAFETY STANDARDS• INTRODUCTION• BEFORE INSTALLATION• SETUP IN A

- 10 -INSTALLATION ENVIRONMENT AND INSTALLATION PROCEDUREThis manual explains the procedures for installing the software in a Windows environment (TCP

- 11 -WindowsSETUP IN A WINDOWS ENVIRONMENTSETTING THE IP ADDRESS OF THE MACHINEBefore installing the printer driver, be sure to set the IP address of

- 12 -SETTING THE IP ADDRESS OF THE MACHINEWindows8Click the "NICManager" button.9The printer or printers connected to the network will be d

- 13 -WindowsCHECKING THE IP ADDRESSTo check the IP address of the machine, hold down the status button on the network expansion kit at least 2 second

- 14 -WindowsINSTALLING THE SOFTWAREINSTALLING THE PRINTER DRIVER (Standard installation)1Insert the network expansion kit "Software" CD-ROM

- 15 -INSTALLING THE SOFTWAREWindows9Printers connected to the network are detected. Select the machine and click the "Next" button.10A conf

- 16 -INSTALLING THE SOFTWAREWindowsCUSTOM INSTALLATIONIf you wish to install the display font or specify the machine's IP address when installin

- 17 -INSTALLING THE SOFTWAREWindows12When the printer driver selection window appears, select the printer driver to be installed and click the "

- 18 -INSTALLING THE SOFTWAREWindowsSHARING THE PRINTER USING WINDOWS NETWORKINGIf the machine will be used as a shared printer on a network, follow t

- 19 -INSTALLING THE SOFTWAREWindows10For the port to be used, select the machine set as a shared printer, and click the "Next" button.You c

- 2 -SAFETY STANDARDS<AR-NB2><AR-NB2/AR-NB2 N>The CE mark logo label is affixed on an equipment in case that the directives described in t

- 20 -INSTALLING THE SOFTWAREWindowsINSTALLING THE PRINTER STATUS MONITOR1Insert the network expansion kit "Software" CD-ROM into your compu

- 21 -INSTALLING THE SOFTWAREWindowsINSTALLING THE PRINTER ADMINISTRATION UTILITY1Insert the network expansion kit "Software" CD-ROM into yo

- 22 -INSTALLING THE SOFTWAREWindowsINSTALLING THE PS DISPLAY FONTSThe fonts used by the PS printer driver are contained in the "PRINTER UTILITIE

- 23 -WindowsUSING THE PPD FILEThe PPD file enables the machine to print using the standard PS driver of the operating system, and can be used when th

- 24 -WindowsCONFIGURING THE PRINTER DRIVERAfter installing the printer driver, you must configure the printer driver settings appropriately for the n

- 25 -MacintoshSETUP IN A MACINTOSH ENVIRONMENTAPPLETALK SETTINGSAfter connecting the machine to the network, configure AppleTalk settings as required

- 26 -INSTALLING THE PPD FILEMacintosh7The License Agreement window will appear. Make sure that you understand the contents of the license agreement,

- 27 -INSTALLING THE PPD FILEMacintoshINSTALLATION IN MAC OS 8.6 - 9.x1Insert the network expansion kit "Software" CD-ROM into your computer

- 28 -MacintoshCONFIGURING THE PRINTER DRIVERFollow the steps below to configure the machine's printer driver.MAC OS X v10.2.x1Make sure that the

- 29 -CONFIGURING THE PRINTER DRIVERMacintosh9Select the PPD file of the machine.10Click the "Add" button.The machine is added to the list o

SAFETY STANDARDS- 3 -<AR-NB2>WARNING:FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approv

- 30 -CONFIGURING THE PRINTER DRIVERMacintoshMAC OS X v10.1.51Make sure that the machine is powered on.2Select "Applications" from the "

- 31 -CONFIGURING THE PRINTER DRIVERMacintoshMAC OS 8.6 - 9.x1Select "Chooser" from the Apple Menu.2Click the "LaserWriter 8" icon

AR-NB2/AR-NB2 NSHARP CORPORATION

- 4 -INTRODUCTIONThis manual explains how to configure network settings and install and configure the software to enable the machine to be used as a n

- 5 -CONTENTSSAFETY STANDARDS... 2INTRODUCTION.

- 6 -BEFORE INSTALLATIONUSING THE MACHINE IN A WINDOWS ENVIRONMENTCD-ROMS IN THE NETWORK EXPANSION KITThe network expansion kit contains the following

- 7 -USING THE MACHINE IN A WINDOWS ENVIRONMENT2. "Network Utilities" CD-ROMThis CD-ROM contains "Quick Setup" and "Standard

- 8 -USING THE MACHINE IN A MACINTOSH ENVIRONMENTTo use the machine as a printer for the Macintosh, the PS3 expansion kit AR-PK1 must be installed.Ins

- 9 -CONNECTING TO A NETWORKAfter the network expansion kit has been installed in the machine, connect a LAN cable to the LAN connector of the network