Sharp AL-2040 Specifications download pdf (Page 9)

Follow the installation procedure below to use the unit properly.

SETUP PROCEDURE

When using the unit for the first time, setup the unit following the procedure shown

below.

*1 If you are only using the unit for copying, skip this step.

*2 The scanner function is only available on the AL-2040CS.

If the unit does not function properly during setup or use, or if a function

cannot be used, see "TROUBLESHOOTING THE UNIT" (p.61).

1 Open the package, and make sure that all the accessories are

supplied with the unit. (p.8)

2 Remove the protective materials. (p.9)

8 Now, you can copy (p.46), print (p.35) or scan*

(p.36) your

document.

3 Install the TD cartridge. (p.10)

4 Load the paper in the paper tray (p.15) or the multi-bypass

tray

. (p.17)

5 Plug the other end of the power cord into the nearest outlet. (p.12)

6 Install the software.*

(p.19)

7 Connect the interface cable*

(p.25) and turn on the unit. (p.12)

SETTING UP THE UNIT

AL-2030_2040CS.book 7 ページ２００７年４月６日　金曜日　午前１１時３２分

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 91 92

No comments

Sharp AL-2040 Specifications Page 9