Sharp VL-Z7S Specifications download pdf (Page 21)

Preparation

11

Inserting and

Removing a Card

You can use an SD Memory Card (supplied)

or a MultiMediaCard (commercially

available) for storing still images.

Inserting

1 Make sure that the Power switch is

set to OFF.

2 Open the card slot cover.

3 Insert a card into the slot as shown

below, and push it in fully.

4 Close the card slot cover securely.

Back view

Locked position

Unlocked position

Removing

Perform steps 1 and 2 above, push the card

and release slowly (1). Then pull the card

straight out (2) as shown below.

Notes:

• You can use only the SD Memory Card or the

MultiMediaCard (see page 97).

• The supplied card is preformatted for

immediate use.

• See page 97 for more information on the

cards intended for use with this camcorder.

• Do not remove the card from the

camcorder while recording data on the

card (S indicator flashes during record-

ing). This may delete the recorded image

or damage the card.

• You cannot insert or remove the card when

using a tripod.

About the write-protect

switch

SD Memory Card has a write-protect switch.

When the switch is set to the locked

position, you cannot record/delete data or

format the card. Set it to the unlocked

position to record/delete data or format the

card.

Card slot cover

Write-protect

switch

Label

Clipped corner

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 121 122

Comments to this Manuals

No comments