Sharp KB-6100NS Installation Manual download pdf (Page 3)

groUnDing instrUctions

anti-tip Block

NORMAL INSTALLATION STEPS

ANTI-TIP BLOCK INSTALLATION INSTRuCTIONS

To reduce the risk of tipping of the drawer, the Anti-Tip block

mustbeproperlyinstalledlocated9-inchesabovetheooron

which the Warming Drawer will sit. The 6-inch Anti-Tip block

must be provided by the installer. See Figures 1, 2, and 4. The

Anti-Tip block prevents serious injury that might result from

spilled hot liquids.

If the Warming Drawer is ever moved to a different location, the

Anti-Tip block must also be moved and installed. When installed

to the wall, make sure that the screws completely penetrate the dry

wall and are secured in wood or metal so that the block is totally

stable. When fastening, be sure that the screws do not penetrate

electrical wiring or plumbing.

(101.6 mm)

9" (228.6 mm)

Electrical Outlet

Location

Anti-tip

Block

6" (153 mm)

Figure 5

38"

10"

30"

Electrical

outlet zone

centerline

Locate outlet in available space

adjacent to the warming drawer.

Solid

Floor

9" cutout opening

1½" x 1½"

Anti-tip

electrical oUtlet

The electrical requirements are a 120 volt 60 Hz, AC only, 15

amp. or more protected electrical supply. It is recommended that

a separate circuit serving only this appliance be provided.

The drawer is equipped with a 3-prong grounding plug. It must

be plugged into a wall receptacle that is properly installed and

grounded.Shouldyouonlyhavea2-prongoutlet,haveaqualied

electrician install a correct wall receptacle.

Note: If you have any questions about the grounding or electrical

instructions,consultaqualiedelectricianorserviceperson.

Figure 6

This appliance must be grounded. The Warming Drawer is equipped with a cord having a grounding

wire with a grounding plug. It must be plugged into a wall receptacle that is properly installed

and grounded in accordance with the National Electrical Code and local codes and ordinances.

In the event of an electrical short circuit, grounding reduces risk of electric shock by providing

an escape wire for the electric current.

– Improper use of the grounding plug can result in a risk of electric shock. Do

notuseanextensioncord.Ifthepowersupplycordistooshort,haveaqualiedelectricianor

serviceman install an outlet near the appliance.

3-Prong Plug

Grounding Pin

3-Prong Receptacle

Grounded Receptacle Box

Permanent and Correct Installation

DraWer installation

Carefully guide the drawer into the prepared opening. Avoid •

pinching the cord between the oven and the wall.

Slidethedrawerallthewayuntilthemountingangeisush•

with the face of the cabinet.

Open the drawer. Using the 4 holes on the drawer as a template, •

predrill the cabinet using a 1/16" bit. See Figure 7A.

Secure the drawer with the 4 screws supplied. See Figure 7B.•

Plug the power supply cord into the electrical outlet. •

Figure 8A

Figure 7A

4 Screws

Parts Supplied

Figure 7B

1 2 3 4

Comments to this Manuals

No comments

Sharp KB-6100NS Installation Manual Page 3

Comments to this Manuals

Related products and manuals for Warming drawers Sharp KB-6100NS