Sharp PN-V600 Operation Instruction Manual download pdf (Page 45)

WhenthePN-ZB02(optional)isattached,yourmonitorcan

beconnectedtoaLANallowingyoutocontrolitfromaPCon

the LAN.

Youcanalsocongurethemonitortosende-mailnotication

when it has a problem.

TheconnectionrequiresacommerciallyavailableLANcable

(UTPcable,Category5,straightthrough).

Hub

LAN terminal

LAN cable (commercially available, straight)

Network (LAN)

TIPS

• YoumustassignanIPaddresstothemonitorbyfollowing

theproceduresin“SettingstoconnecttoaLAN”.(Seethe

descriptionontheright.)

• YourPCmustbeinstalledwithInternetExplorer(version7.0

orlater).

• TocontrolthemonitorviaLAN,setRS-232C/LANSELECT

toLAN.(Seepage24.)

• YoucannotuseRS-232CandLANcontrolsimultaneously.

Initializing personal information

• WhenthePN-ZB02(optional)isattached,personal

informationsuchase-mailaddressescanberegisteredin

themonitor.Beforetransferringordisposingofthemonitor,

initializeallsettingsbyselectingALLRESET1.(See

page31.)NotethatALLRESET2willnotinitializee-mail

addresses and other settings.

Controlling the Monitor with a PC (LAN)

Settings to connect to a LAN

Set the monitor’s IP address and subnet mask to match the

settings of your LAN.

ThesesettingscanbemadeoneitherthemonitororaPC

connected to the monitor.

ThesettingsdependonthecongurationofyourLAN.Ask

your LAN administrator for details.

■ To set on the monitor

SetRS-232C/LANSELECTontheSETUPmenutoLAN,and

thensettheLANSETUPoptions.(Seepages24and25.)

Aftersettingeachitem,selectSETandpress

DHCP CLIENT

IfyourLANhasaDHCPserverandyouwishtoobtainan

address automatically, change this setting to ON.

Tosettheaddressmanually,setthistoOFF.

IP ADDRESS

IftheDHCPCLIENTissettoOFF,specifyanIPaddress.

Press

or to select items, and press or to

change the values.

SUBNET MASK

IftheDHCPCLIENTissettoOFF,specifythesubnetmask.

Press

or to select items, and press or to

change the values.

DEFAULT GATEWAY

IftheDHCPCLIENTissettoOFF,specifythedefault

gateway.

Ifyouarenotusingagateway,specify“0.0.0.0”.

Press

or to select items, and press or to

change the values.

RESET

Resets the values of the LAN settings to the factory preset

values.

Select ON and then press

TIPS

• WhenmanuallysettingtheIPaddress,theIPaddress

forsecondarymonitorsconnectedbyRS-232Ccanbe

automaticallyallocated.(Seepage25.)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 60 61

Comments to this Manuals

No comments

Sharp PN-V600 Operation Instruction Manual Page 45

Comments to this Manuals

Related products and manuals for TVs & monitors Sharp PN-V600 Operation