Sharp LC-15A2U Service Manual download pdf (Page 8)

LC-15A2U

DISASSEMBLY OF THE SET

1. Insert your finger into the center of the terminal cover

and pull it toward you to detach the terminal cover.

2. Remove the four screws 1 and one screw 2.

3. Open the cabinet B by approx. 45˚ from the bottom

of the cabinet (stand side).

4. Remove the lead wire from the cable clamp 3.

5. Remove the power connector 4.

6. Remove the connector 5 from the light reception

unit.

7. Remove the lead wire from the cable clamp 6.

8. Remove the speaker connector 7.

9. Remove the FFC from the FFC connector 8 on the

main PWB.

10. Remove the connector 9 from the switch PWB.

11. Remove the right and left speaker connectors 0

on the terminal PWB.

<<Disassembly of the main PWB>>

1. Disconnect the flexible cable connectors q and

w from the LCD panel.

2. Disconnect the cable connectors e and r from

the fluorescent lamp.

3. Remove the four screws t.

<<Disassembly of the terminal PWB>>

1. Remove the cover u.

2. Remove the five screws y.

3. Remove the two screws i. Take them out of the

cabinet holes.

<<Cabinet A side>>

<<Cabinet B side>>

Cabinet A CCABA2402CE02

Terminal Cover GCOVA1858CEKA

Hinge Cover GCOVA1853CESA

Rotation Cover GCOVA1854CESA

Cabinet B CCABB2288CE01

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

No comments

Sharp LC-15A2U Service Manual Page 8