Sharp LD-23SH1U Specifications download pdf (Page 21)

E20

Connecting the TV to a computer

Analog connection

Connect the supplied PC analog signal cable to

the analog RGB output terminal of the computer.

See page E10 for information on removing/

replacing the terminal cover.

- Paying attention to the connector direction, firmly

insert the signal cable straight into the

connector, and then tighten the screws at both

ends.

If connecting to a D-sub 15 pin 2 row Apple Power

Macintosh, attach a Macintosh conversion adapter

(commercially available) to the analog signal

cable.

CAUTION!

- When connecting, ensure that the TV and all the

equipment you are connecting to it are switched

off.

- Be careful not to over bend the cable or add

extension cords as this could lead to a

malfunction.

Notes:

- When using the TV with an analog connection,

perform an automatic screen adjustment (page

E26) under the following conditions:

- Using the TV for the first time.

- After having changed the system settings

during use.

- When using the TV with a digital connection,

automatic screen adjustment is unnecessary.

- Depending on the computer or OS, you may

have to install the set-up information for the TV.

(See page E51.)

- When connecting to a notebook computer and

the notebook computer's screen is set so that it

is displaying at the same time, the MS-DOS

screen may not be able to display properly. In

this case, change the settings so that only the TV

is displaying.

PC analog RGB input terminal

(Mini D-sub 15 pin, 3 rows)

PC analog signal cable

(supplied)

Analog RGB output terminal

(

Mini D-sub 15 pin, 3 rows

)

Computer

Power Macintosh

Macintosh conversion adapter

LD-23SH1U_gb_01.P65 2005/01/20, 20:2220

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 62 63

Comments to this Manuals

No comments

Sharp LD-23SH1U Specifications Page 21

Comments to this Manuals