Sharp DK-KP82PH Specifications download pdf (Page 6)

Aerial connection■

Supplied FM aerial:

Connect the FM aerial wire to the FM 75 OHMS socket

and position the FM aerial wire in the direction where the

strongest signal can be received.

External FM aerial:

Use an external FM aerial (75 ohms coaxial cable) for

better reception. When an external FM aerial is used,

disconnect the supplied FM aerial wire.

Installing the AM loop aerial:

Wall

Screws (not supplied)

Note:

Placing the aerial on the unit or near the AC power lead

may cause noise pickup. Place the aerial away from the

unit for better reception.

AC power connection■

After checking all the connections have been made correctly,

plug the AC power lead of this unit into the wall socket.

Note:

Unplug the AC power lead from the wall socket if the unit

will not be in use for a prolonged period of time.

Demonstration mode■

The rst time the unit is plugged in, the unit will enter

the demonstration mode.

To cancel the demonstration mode, press the DEMO

button (remote control) during power stand-by mode.

The unit will enter the low power consumption mode.

To return to the demonstration mode, press the DEMO

button again.

If iPod or iPhone is docked, the unit will begin charging.

“Charge Mode” will be displayed. Demonstration

mode is invalid during charge mode.

●

Make sure to unplug the AC power lead before making any connections.

Wall socket

(AC 220 - 240 V ~ 50/60 Hz)

External FM aerial for better

reception (not supplied)

FM aerial

AM loop

aerial

System connections

DK-KP82PH_OM_EN_SCA.indd 5 2013-02-26 07:33:15

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments

Sharp DK-KP82PH Specifications Page 6

Comments to this Manuals

Related products and manuals for Mobile device dock stations Sharp DK-KP82PH