Sharp MD-MS200 Service Manual download pdf (Page 4)

MD-MS200W/MD-MS200/MD-MS200H

– 4 –

OPERATION MANUAL

Rechargeable battery

power

When the rechargeable battery is used for

the first time or when you want to use it

after a long period of disuse, be sure to

charge it fully.

Open the rechargeable battery com-

partment cover.

Insert the rechargeable battery.

Insert the side with the arrow first.

Close the rechargeable battery com-

partment cover.

Plug the AC adaptor into the AC

socket, and then insert the plug on the

AC adaptor lead into the DC IN 5V

socket.

Press the n OFF button to begin charg-

ing.

“ ” will appear, and the battery will

begin charging.

Battery charging will be complete in 3

hours. When battery charging begins,

“ ” will be displayed. When the

charging is complete, it will go out.

Notes:

After charging has been completed, the

AC adaptor may be left connected.

(Charging at night.)

The battery will not be charged whilst

the main unit is operating.

If the AC adaptor is removed from the

main unit or from the AC socket whilst

charging, “ ” will not disappear for

about 1 minute. This is normal.

NAME OF PARTS

Main Unit

1. Synchro Recording Indicator

2. Level Meter

3. Battery Indicator

4. Character Information Display

5. Disc Status Indicator

6. TOC Indicator

7. Random Indicator

8. Repeat Indicator:

9. Monaural Long-Play Mode Indicator

10. Play/Pause Button:

11. Stop/Power Off/Charge Button:

12. Fast Reverse/Fast Forward/Recording Level Control/

Cursor Button: /

13. Microphone Input Socket

14. Hold Switch

15. Eject Lever

16. Enter/Synchro/Fast Play Button

17. Character/Symbol Select/Time Button

18. Display/Lowercase Letter Button

19. Record/Track Mark Button

20. Edit/Auto Mark/Time Mark Button

21. Mode/Space Button

22. Extra Bass/Delete Button

23. Volume/Name Select Buttons:

24. 5V DC IN Socket

25. Headphones Socket

26. Optical/Line Input Socket

27. Rechargeable Lithium-Ion Battery Compartment

Remote Control Unit

1. Volume Buttons:

2. Stop/Power Off Button

3. Track Mark/Extra Bass Button

4. Play/Pause Button:

5. Fast Reverse/Fast Forward/Cursor Buttons: /

6. Hold Switch

REC

TOC SYNC MONO

RANDOM

dB 40 12 4 0

OVER

24 25

BASS

VOL.

Rechargeable battery

operating time

After charging is complete, the unit can be

used continuously as follows:

Continuous playback:

Approx. 9.5 hours (fully charged, vol-

ume level: VOL 20)

Continuous recording:

Approx. 7 hours (fully charged, anal-

ogue input, volume level: VOL 0)

How to determine the remaining

battery time:

As the battery charge is reduced, the bars

in the indicator will go out one by one.

When the battery is almost completely ex-

hausted, the whole battery indicator will

flash.

At this point you should recharge the bat-

tery.

When the battery has run completely out,

“BATT EMPTY” will be displayed, and the

power will be disconnected automatically.

When the AC adaptor is used, the bat-

tery indicator will light up in the fully

charged condition.

Note:

If the battery indicator is flashing, it will be

impossible to start recording or editing.

Notes about the

rechargeable battery

A rechargeable lithium-ion battery is

the only kind that can be used.

Even if the battery supplied with the

unit is not used, you should charge it at

least once every three months because

of the special quality of this battery.

The rechargeable battery can be

charged approximately 300 times.

Do not use any battery other than that

specified. Use of other batteries may

cause malfunctions.

When the operating time is reduced to

about half the normal amount of time,

even after a full charge is performed,

replace the battery with a new one.

When charging or when using the re-

chargeable battery, use it within an am-

bient temperature range of 5 C to

35°

1 2 3 4 5 6 7 8 9 ... 55 56

Comments to this Manuals

No comments

Sharp MD-MS200 Service Manual Page 4

Comments to this Manuals

Related products and manuals for Minidisc players Sharp MD-MS200