Sharp LCD colour TV Specifications download pdf (Page 18)

Child Lock

Allow you to use a PIN to protect certain settings from

being accidentally changed.

Changing the PIN

1 Press MENU and the MENU screen displays.

2 Press c/d to select “Setup”.

3 Press a/b to select “Child Lock”, and then press

OK.

New PIN

–––

Reconfirm

––––

–

Change PIN

Reset

4 Enter the 4-digit number as a PIN using 0 – 9.

5 Enter the same 4-digit number as in step 4 to

confirm.

• “The system PIN has been changed successfully”

displays.

NOTE

• To view a locked channel (Lock setting in Programme

Setup “Manual Adjust” is set to “On”), you must enter a

PIN. (See page 15.) When you select a locked channel, a

PIN prompt message pops up. Press OK to display the

PIN input window.

Resetting the PIN

Allow you to reset your PIN to the factory preset “1234”.

1 Repeat steps 1 to 3 in Changing the PIN.

2 Enter the PIN.

3 Press a/b to select “Reset”, and then press OK.

4 Press c/d to select “Ye s ”, and then press OK.

NOTE

• As a precautionary measure, make a note of your PIN

on the back of this operation manual, cut it out and

keep it in a safe place that children cannot reach.

• See page 21 for resetting the current PIN to the factory

preset “1234” if you lose or forget your PIN.

Menu operations

Input Label

You can assign each input source a label you like.

1 Press b to select the desired input source.

2 Press MENU and the MENU screen displays.

3 Press c/d to select “Setup”.

4 Press a/b to select “Input Label”, and then press

OK.

5 Press a/b/c/d to select each character of the

new name for the input source, and then press

OK.

6 Repeat step 5 above until the name is fully spelt

out, and then press OK.

• The name can be 6 characters or less.

• If a label name is less than 6 characters, select

“END”, then press OK.

NOTE

• You cannot change the label if the input source is TV.

TV only

Fine Sync.

Menu Operation: C (Page 11)

Ordinarily, the TV automatically adjusts image positions

coming from PC (Auto Sync. function). In some cases,

however, manual adjustment is needed to optimise the

image.

H-Pos.: Centres the image by moving it to the left or right.

V-Pos.: Centres the image by moving it up or down.

Clock: Adjusts when the image flickers with vertical

stripes.

Phase: Adjusts when characters have low contrast or

when the image flickers.

PC only

NOTE

• If you need to adjust the image position, adjust the position

using your PC.

Item

LC-32SA1E_GB_b 06.7.25, 11:35 AM16

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comments to this Manuals

No comments

Sharp LCD colour TV Specifications Page 18

Comments to this Manuals

Related products and manuals for LCD TVs Sharp LCD colour TV