Sharp LC-15B6U-S Operation Operations Instructions download pdf (Page 43)

Troubleshooting

■ Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.

LCD TV set

Problem Check item

Reference page

There is no

picture.

There is no

picture from

AV-IN1 or

AV-IN2.

–

• Make sure the AC adapter is properly inserted in the

power outlet.

• Reception other than those of broadcasting stations can

be considered.

• Make sure the input mode is set to TV.

• Make sure the MAIN POWER switch of the main unit is

on.

There is no

picture or

sound.

• Make sure the BRIGHTNESS is properly adjusted.

• Fluorescent lamp may have reached the end of service

life.

• Make sure the S-VIDEO terminal has nothing connected.

• Make sure the AUDIO ONLY is not set to ON.

There is no

sound.

• Make sure the volume is not set to minimum.

• Make sure the sound is not set to mute.

• Make sure that headphones are not connected.

There is no

picture or

sound, just

noise.

• Make sure the antenna cable is properly connected.

• Bad reception could be the problem.

Picture is

not clear.

• Make sure the antenna cable is properly connected.

• Bad reception could be the problem.

Picture is

light or

improperly

tinted.

• Check color adjustment.

• Check COLOR SYSTEM setting.

The picture

is too dark.

• Press the BACKLIGHT button or set the BACKLIGHT or

BRIGHTNESS settings.

• Check CONTRAST and BRIGHTNESS adjustment.

• Fluorescent lamp may have reached the end of service

life.

Remote control does not work.

• Check the batteries of the remote control.

• Make sure the remote sensor window is not under strong

lighting.

9, 10

–

9, 10

–

22, 23

The clock (AUTO CLOCK)

cannot be set.

• The broadcasted EDS signal may be weak. Check the

antenna.

• Carry out EZ SETUP or Setting the CLOCK again.

• If EDS signal is not sent, set the clock using MANUAL

CLOCK Setting.

–

14-16, 26

Sound

Picture

Unit cannot be operated.

–

• External influences such as lightning, static electricity,

etc., may cause improper operation. In this case, operate

the unit after first turning the power off the LCD TV set,

or unplugging the AC cord and re-plugging it in after 1 or

2 minutes.

LC-13_15B6U_P39-48.p65 04.5.27, 4:59 PM42

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49

Comments to this Manuals

No comments

Sharp LC-15B6U-S Operation Operations Instructions Page 43

Comments to this Manuals

Related products and manuals for LCD TVs Sharp LC-15B6U-S Operation