Sharp Aquos LC-40LE600E Specifications download pdf (Page 27)

Connecting a PC

HDMI Connection

PC HDMI 1, 2 or 3



HDMI-certified cable

PC HDMI 2*





DVI/HDMI cable ø 3.5 mm stereo

minijack cable



When using the HDMI 2 terminal, you must select the proper

item in the “PC Audio Select” menu depending on the type of

HDMI cable connected (Refer to page 19 for details).

Analogue Connection

PC EXT 4*





RGB cable ø 3.5 mm stereo

minijack cable



PC EXT 4*





DVI/RGB conversion

cable

 ø 3.5 mm stereo

minijack cable



When using the EXT 4 terminal, you must select “EXT 4 (RGB)”

in the “PC Audio Select” menu (Refer to page 19 for details).

NOTE

The PC input terminals are DDC1/2B-compatible.

Refer to page 27 for a list of PC signals compatible with the TV.

When connecting to a PC, the input signal type is automatically

detected.

•

Adjusting the PC image

automatically

This function enables the screen to be automatically

adjusted to its best possible condition when the analogue

terminals of the TV and PC are connected with a

commercially available DVI/RGB conversion cable, etc.

Setup

Auto Sync.

NOTE

“Auto Sync.” may fail if the PC image has low resolution, has

unclear (black) edges, or is moved while executing “Auto

Sync.”.

Be sure to connect the PC to the TV and switch it on before

starting “Auto Sync.”.

“Auto Sync.” can be executed only when inputting analogue

signals through the EXT 4 terminal.

Adjusting the PC image manually

Ordinarily you can easily adjust the picture as necessary

to change image position using “Auto Sync.”. In some

cases, however, manual adjustment is needed to

optimise the image.

Setup

Fine Sync.

Press a/b to select the specific adjustment

item.

Press c/d to adjust the item to the desired

position.

H-Pos.

V-Pos.

Clock

Phase

Item

H-Pos.

Centres the image by moving it to the

left or right.

V-Pos.

Centres the image by moving it up or

down.

Clock

Adjusts when the image flickers with

vertical stripes.

Phase

Adjusts when characters have low

contrast or when the image flickers.

NOTE

For resetting all adjustment items to the factory preset values,

press a/b to select “Reset”, and then press ;.

“Clock” and “Phase” in the “Fine Sync.” menu can be adjusted

only when inputting analogue signals through the EXT 4

terminal.

•

Connecting a PC

LC-LE600E_GB3.indd 25LC-LE600E_GB3.indd 25 2009/07/14 14:38:032009/07/14 14:38:03

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments

Sharp Aquos LC-40LE600E Specifications Page 27

Comments to this Manuals

Related products and manuals for LCD TVs Sharp Aquos LC-40LE600E