Preparation
Antennas
To enjoy a clearer picture, use
an
outdoor antenna. The following
is
a brief explanation of the types of connections
that
are
used for a coaxial cable.
If
your outdoor antenna uses a 75-ohm coaxial cable with
an
F-type connector,
plug
it
into the antenna terminal at the rear of the
lV
set.
300-ohm twin-lead cable
(flat)
IF-type
connector
----oct}
75-ohm coaxial cable (round)
1.
A 75-ohm system
is
generally a round cable with F-type connector
that can easily be attached
to
a terminal without tools (Commercially
available).
2. A 300-ohm system
is
a flat "twin-lead" cable that can be attached
to a 75-ohm terminal through a 300/75-ohm adapter (Commercially
available).
4&D
F-type connector should be finger-tightened only.
When connecting the
RF
cable to the
lV
set, do not tighten F-type
connector with tools.
If
tools
are
used, it may cause damage to your
lV
set.
(The
breaking
of internal circuit, etc.)
~~l---:-C
F-type connector
~A~
/'"
75-ohm coaxial cable
Connecting Antenna Cable
• Connect the antenna cable to the TV using one of the methods
in
the illustration as shown
(CD,
®.
@ or @).
300nS-ohm adapter
(commercially available}
•
3OO-ohm
twin·
lead cable
I
Of
300-ohm twin-lead cable (flat) I
75-ohm
coaxial
cable
(round)
Home
Antenna
terminal (7S-ohm)
....
Ca.b
..
le
..
TV.le.a
..
d-iii'n
[!j
Dl===i~-=:J
Coaxial
cable
(commercially
available)
Home
Antenna
7S-ohm coaxial cable (round) terminai (7S-ohm)
'----------[!j
e-===i~-=:J
Coaxial
cable
(commercially
available)
300-ohm twin-lead cable r
~:mbine~UTr--.-----+-
0
t:=;====::::=======
(commercially available)
lor
75-ohm
coaxial
cable
t::::!:=============~1G-
To
TV antenna
terminal
VHF
UHF
ANTENNA ANTENNA
® VHF/UHF antenna
@ Separate VHF/UHF
antenna
@ Combination VHF/
UHF antenna
CD
Cable without a CATV
converter
Installing Batteries
in
the Remote Control Unit
If
the remote control fails to operate
lV
functions, replace the batteries
in
the remote control unit.
1 Open the battery cover. 2 Insert two "MAn size batteries 3 Close the battery cover.
(supplied with the product).
• Place the batteries with their terminals
corresponding
to
the (+)and (- )
indications
in
the battery compartment.
mmmD
Improper use
of
batteries can result
in
chemical leakage or explosion. Be sure
to
follow the instructions below.
• Do not mix batteries
of
different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life
of
new batteries
or
cause chemical leakage
in
old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come
in
contact with skin can cause a
rash.
If
you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
•
If
you will not be using the remote control unit for an extended period
of
time, remove batteries from
it.
@-8
Comments to this Manuals