Sharp Aquos LC-37D44U Operations Instructions download pdf (Page 20)

On-Screen Display Menu

=o - • • -

Power control setting allows you to save energy.

ExampNe I _ Power Control

1 Press MENU to display the MENU screen, and then

press _/_. to select "Power CentroV'.

2 Press A/Y to select a "No Signal Off" or "No

Operation Off", and then press ENTER.

3 Press _/1_ to select "Enable", and then press

ENTER.

4 Press MENU to exit.

When set to"Enable", the power ,will automatically shut

down if there is no signal for 15 minutes.

_J_y

o Five minutes before the power shuts down, the remaining

time displays every minute.

o "Disable" is the factory preset value.

o When a TV program finishes, this function may not operate.

When set to "Enable", the power will automatically shut

down if there is no operation for 3 hours.

o Five minutes before the power shuts down, the remaining

time displays every minute.

o "Disable" is the factory preset vahJe.

" • k_'|

ExarnpNe [ _qlgl_Setup

1 Press MENU to display the MENU screen, and then

press ..9/_. to select "Setup".

2 Press ,&/V to select a specific adjustment item,

and then press ENTER.

o When you select "EZ Setup", "CH Setup", "Parental

CTRL" and "Reset", you can enter the 4 digit secret

number here. See page 22 tot setting a secret number.

3 Press ,&/V (or ".9/I_) to select the desired setting,

and then press ENTER.

4 Press MENU to exit.

You can run EZ Setup again, even after setting up the

preset channels.

Language; Select from among 3 languages (English,

French and Spanish).

TV Location: Select "Home" or "Store" for the location

where you plan to install the TV.

Ifyou select"Home", AV MODE isset to "STANDARD".

= Ifyou select"Store", AV MODEis setto "DYNAMIC(Fixed)".

In caseno remotecontrol signal is receivedwithin 30

minutes,AVMODE will changeto "DYNAMIC(Fixed)"

automatically.

Air/Cable: Make sure what kind of connection is made

with your TV when selecting "Air" or "Cable".

OH Search: Channel auto search makes the TV look for

all channels viewable in the set area.

o See "Initial Setup" on page 12 for setting each item.

o If no channel is found, confirm the type of connection made

with your TV and try EZ Setup again.

o If you select "Analog Search Start" and initiate the channel

search, the CH Memory for Cable Digital will be deleted.

If initial setup does not memorize all the channels in

your region, follow the instructions below to manually

memorize the channels.

Air/Cable: Make sure what kind of connection is made

with your TV when selecting "Air" or "Cable".

OH Search: Channel auto search makes the TV look for

all channels viewable in the set area.

OH Memory: You can select the channels to skip in each

ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and

DIGFAL (Cable).

On: SkJpschannels.(Channel selectiondisabledusing CH

A/V.)

Off: Doesnot skip channels.(Channelselectionenabledusing

CHA/V.)

o See "Initial Setup" on page 12 for setting each item.

o If no channel is found, confirm the type of connection made

with your TV and try channel search again.

o If you select "Analog Search Start" and initiate the channel

search, the CH Memory for Cable Digital will be deleted.

In order to receive digital air broadcasts, you need

a digital broadcast antenna. You can confirm the

antenna configuration through the "Antenna Setup -

DIGITAL" screen. If necessary, adjust the direction of

the antenna to obtain the maximum signal strength.

Signal Strength: The signal strength of DIGITAL channel

is displayed. The signal information is based on the

current channel.

Channel Strength; Input the 2-digit channel number

to check the signal strength of the selected channel.

Make sure the signal is strong enough for each

channel.

= Thisfunction is availablefor DIGITAL(Air)only.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Comments to this Manuals

No comments

Sharp Aquos LC-37D44U Operations Instructions Page 20

Comments to this Manuals

Related products and manuals for LCD TVs Sharp Aquos LC-37D44U