Sharp MX-C400P Owner's Manual download pdf (Page 11)

INSTALLING THE PRINTER

DRIVER

To install the printer driver, follow the appropriate procedure in this section

depending on whether the machine is connected to a network or connected by

USB cable.

☞

WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE (page 21)

WHEN THE MACHINE IS CONNECTED TO A

NETWORK

This section explains how to install the printer driver when the machine is

connected to a Windows network (TCP/IP network).

Supported operating systems: Windows 98/Me/NT 4.0

/2000

/XP

Server 2003

/Vista

/Server 2008

* Administrator's rights are required to install the software.

•

To install the PPD driver when Windows 98/Me/NT 4.0 is used, see "USING

THE STANDARD WINDOWS PS PRINTER DRIVER (Windows 98/Me/NT 4.0)"

(page 32) and install the driver using the Add Printer Wizard.

• To use the machine as a network printer in Windows NT 4.0, "TCP/IP

Protocol" must be installed on your computer. If this is not installed, see

Windows NT 4.0 Help to install "TCP/IP Protocol".

• To print to the machine over the Internet using the IPP function when

the machine is installed in a remote location, or to print using the SSL

(encrypted communication) function, see "Printing using the IPP

function and the SSL function" (page 18) and install the printer driver.

• If the machine is connected to an IPv6-only network, the software

cannot be installed by detecting or specifying the machine's address

from the installer.

!mxc400P_us_ins.book 9 ページ２００９年１０月５日　月曜日　午後２時２７分

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 67 68

No comments

Sharp MX-C400P Owner's Manual Page 11