Sharp MX-B380P Specifications download pdf (Page 48)

REMOVING MISFEEDS

When a paper misfeed occurs, the message "A misfeed has occurred." will

appear in the display and printing will stop. In this event, select the

[Information] key in the display. When the key is selected, instructions for

removing the misfeed will appear. Follow the instructions. When the misfeed

is cleared, the message will automatically clear.

The blinking mark in the image at left indicates the approximate position

of the misfeed.

Select the [Information] key to

display the following screen.

(A)Instructions for removing the

misfeed appear here.

(B)Animation showing what to

do.

(C)Display the previous screen

or the next screen.

(D)This closes the information

screen.

The information screen cannot be

closed until the misfeed is removed.

For detailed procedures for removing misfeeds, see "REMOVING

MISFEEDS" in "Chapter 4 - TROUBLESHOOTING" in the Operation Guide.

A misfeed has occurred.

Turning M/C off now causes data loss.

Misfeed location

(A)

(C)

(D)

(B)

•

While the message appears, printing cannot be resumed.

• If the message does not clear even after the misfeed has been

removed, the causes below are possible. Check once again.

- The misfeed was not correctly removed.

- A torn piece of paper remains in the machine.

- A cover or unit that was opened or moved to remove the misfeed

was not returned to its original position.

mxb380p_en_qck.book 46 ページ２０１０年３月１２日　金曜日　午後１２時５３分

1 2 ... 43 44 45 46 47 48 49 50 51 52

No comments

Sharp MX-B380P Specifications Page 48