Sharp PN-K322B Quick Start Guide download pdf (Page 10)

• When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.

• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.

This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the

thickness of the mounting bracket.

• Do not use an impact driver.

• When moving the monitor, be sure to hold it with the unit bottom and the side of unit. Do not hold the LCD panel or corners.

This may cause product damage, failure, or injury.

• Do not use any screw holes other than VESA holes for installation.

Model PN-K322B

Power requirement AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter)

Operating temperature 41°F to 95°F (5°C to 35°C)

Operating humidity 20% to 80% (no condensation)

Power consumption 97 W * (when using the supplied AC adapter)

Dimensions (excluding protrusions) inch (mm)

Monitor only

Approx. 29-17/32(W) x 1-27/64(D) x 17-3/8(H) (750 x 36 x 441)

Monitor on supplied stand

• Monitor screen angle 90° (from horizontal)

Approx. 29-17/32(W) x 15-23/64(D) x 19-27/64(H) (750 x 390 x 493)

•

Monitor screen angle 25° (from horizontal)

Approx. 29-17/32(W) x 22-41/64(D) x 8-5/32(H) (750 x 575 x 207)

Weight lbs. (kg) Approx. 19.9 (9.0) (monitor only)

Approx. 35.3 (16.0) (monitor on supplied stand)

* When using the monitor in DC19.5 V : 91 W

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement

without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from

these values in individual units.

Specications

Mounting Precautions (For SHARP dealers and service engineers)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

No comments

Sharp PN-K322B Quick Start Guide Page 10