Sharp MD-M2H Operations Instructions download pdf (Page 88)

88

About the COMPONENT VIDEO OUT/SCAN

SELECT switch

The COMPONENT VIDEO OUT/SCAN

SELECT switch on the rear panel of the

player selects the signal output from the

COMPONENT VIDEO OUT jacks:

interlace, progressive, or selectable. The

switch takes priority over the setting made in

“COMPONENT OUT.”

To switch the video signal format

If you have selected “PROGRESSIVE” for a

TV that does not accept signals in progressive

format 480p, or if the software’s video signals

are not suited for progressive video signal

conversion, view the image in Interlace

format.

1 Set the COMPONENT VIDEO OUT/

SCAN SELECT switch on the rear panel

of the player to INTERLACE.

“COMPONENT OUT” in “SCREEN

SET UP” is automatically set to

“INTERLACE.”

2 Reset the COMPONENT VIDEO OUT/

SCAN SELECT switch to

SELECTABLE.

Normally leave the switch in this position

when using the COMPONENT VIDEO

OUT jacks.

When “PROGRESSIVE” is selected in

“COMPONENT OUT”

• 4:3 OUTPUT

Adjust this when you watch progressive

signals on a standard 4:3 aspect ratio

television. If you can change the aspect ratio

on your progressive format (480p)

compatible TV, change the setting on your

TV, not the player.

FULL Select this when you can change

the aspect ratio on your TV.

NORMAL Select this when you cannot

change the aspect ratio on your

TV. Shows a 16:9 aspect ratio

signal with black bands on left

and right sides of the image, and

a 4:3 aspect ratio signal with

black bands on all sides of the

image.

16:9 aspect ratio TV 4:3 aspect ratio TV

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 103 104

Comments to this Manuals

No comments