Sharp MX-M503U Specifications download pdf (Page 44)

CHANGING THE PORT

When using the machine in a Windows environment, follow the steps below to change the port when you have changed

the IP address of the machine or have installed the PC-Fax driver when the machine is connected with a USB cable. If

the machine is being used on an IPv6 network, follow the steps 1 to 3 below and see "Changing to a Standard TCP/IP

Port" (page 29) for the remaining steps of the procedure to change the port.

Click the [Start] button ( ), click

[Control Panel], and then click [Printer].

• In Windows XP/Server 2003, click the [start] button

and then click [Printers and Faxes].

• In Windows 98/Me/NT 4.0/2000, click the [Start]

button, select [Settings], and then click [Printers].

Open the printer properties window.

(1) Right-click the printer driver icon of the

machine.

(2) Select [Properties].

Adding or changing a port.

(1) Click the [Ports] tab.

In Windows 98/Me, click the [Details] tab.

(2) Click the [Add Port] button.

If [Printers and Faxes] does not appear in the [start]

menu in Windows XP, click the [start] button, click

[Control Panel], click [Printers and Other Hardware],

and then click [Printers and Faxes].

To change to a previously created port such as USB

port, select the desired port (USB001, etc.) from the

list and click the [Apply] button. This changes the port.

(2)

(1)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 71 72

No comments

Sharp MX-M503U Specifications Page 44