Sharp AR-M230 Series Specifications download pdf (Page 11)

BEFORE USING THE FAX FEATURE

FAX MODE (CONDITION SETTING SCREEN)

The condition setting screen of fax mode is displayed by pressing the [FAX] key while the print mode, copy mode, or

job status screen appears in the touch panel. In the explanations that follow, it is assumed that the initial screen that

appears after pressing the [FAX] key is the condition setting screen (shown below). If you have set the display to

show the address directory (p.8) when the [FAX] key is pressed, touch the [CONDITION SETTINGS] key in the

address directory to display the condition setting screen.

A key operator program can be used to set the display to show either the condition setting screen (shown below) or

the address directory screen (p.8) when the [FAX] key is pressed ("DEFAULT DISPLAY SETTINGS" (p.97)).

Condition setting screen

The display is initially set (factory setting) to show the following screen when the [FAX] key is pressed.

Message display

Messages appear here to indicate the current

status of the machine. When the machine is ready

to send, an icon appears to the left.

Memory and reception mode display

This shows the amount of fax memory that is free

and the currently selected reception mode.

[SPEAKER] key (p.11)

This key is used for dialling with the speaker.

During dialling it changes into the [PAUSE] key,

and after pressing the [SUB ADDRESS] key it

changes into the [SPACE] key.

[REDIAL] key (p.11)

Touch this key to redial the most recently dialled

number. After dialling, this key changes into the

[NEXT ADDRESS] key.

[ADDRESS BOOK] key (p.16)

This displays the Address Directory screen (p.8).

Touch this key when you want to use an auto-dial

number (rapid dialling or group dialling).

[SUB ADDRESS] key (p.53)

Touch this key to enter a sub-address or

passcode.

[ADDRESS REVIEW] key (p.27)

When performing a broadcast transmission, touch

this key to check your selected destinations. A list

of your selected destinations will appear, and

destinations can be deleted from the list.

[DIRECT TX MEMORY TX] key (p.14)

Touch this key to switch from memory

transmission mode to direct transmission mode.

The selected mode is highlighted.

[SPECIAL MODES] key

Touch this key to select one of the following

special functions:

• Timer transmission (p.30) • Polling (p.33)

• Slow scan mode (p.39) • Dual page scan (p.40)

• Program (p.41) • Memory box (p.48)

• Cover sheet (p.42) • TX message (p.43)

• Sending options (p.47 and p.50)

• Own passcode select (p.45)

For information about the "R" key, refer to page

100. (Not available for UK)

Original settings icon display

When two-sided scanning (p.17) or job build mode

(p.18) is selected (touch the [ORIGINAL] key to

select these functions), an icon will appear in this

display.

The icon can be touched to open the original

settings screen.

[ORIGINAL] key (p.20)

Touch this key to manually set the original size or

select two-sided scanning.

[RESOLUTION] key (p.21)

Touch this key to change the resolution setting

when scanning an original. The selected resolution

setting will be highlighted above the key. The initial

factory setting is [STANDARD].

ADDRESS

BOOK

AUTO

READY TO SEND.

ORIGINAL

STANDARD

RESOLUTION

AUTO

EXPOSURE

SUB ADDRESS

ADDRESS REVIEW

SPECIAL MODES

REDIAL

SPEAKER

FAX MEMORY:100%

AUTO RECEPTION

DIRECT TX MEMORY TX

2 3

The message will

vary depending on

the country and

the region.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 117 118

Comments to this Manuals

No comments

Sharp AR-M230 Series Specifications Page 11

Comments to this Manuals

Related products and manuals for Copiers Sharp AR-M230 Series