Sharp R-1881LSY Installation Manual download pdf (Page 3)

6 INSTALLATION HARDWARE

The INSTALLATION HARDWARE: items 1 - 7 packed with the oven should contain the following:.

ITEM NAME QUANTITY PART CODE

Wood Screw 5 x 30 mm 6 XTSS750P35000

Toggle Bolt #10 - 24 x 50 mm 4 LX-BZ0195WRE0

Top Cabinet Screw 5 x 60 mm 2 XBPS750P60000

Flat Washer 30 mm diameter 2 XWH750-16300

Grommet 1 LBSHC0040MRE0

Tapping Screw 4 x 12 mm 1 XOTS740P12000

Exhaust Damper Assembly 1 FFTA-B004MRK0

Parts shown not to common scale.

Figure 5

7 PREPARATION OF THE OVEN

Note: This step does not apply to R-1881LSY

Utilization of the carton may make installation easier.

1. Open the bottom of the carton, remove oven and all packing materials.

2. CHECK THE OVEN.

Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surfaces, broken or loose

door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact

your dealer or SHARP AUTHORIZED SERVICER.

3. Place carton upside down as shown in Figure 6-1.

4. Using cutting line around the carton, cut into two pieces (A) and (BC). See Figure 6-2.

5. Cut the remaining portion (BC) into portion (B) and portion (C) according to cutting line. See Figure 6-3.

Top side

(A)

(B)

(C)

Cutting line

Figure 6-1 Figure 6-2 Figure 6-3

1 2 3 4 5 6 7 8

No comments

Sharp R-1881LSY Installation Manual Page 3