Sharp UP-600 User Manual download pdf (Page 29)

3. Creating/updating the master list — master

(1) Creating the master list

This may only be performed on the pre-designated master.

Turn the mode switch to the PGM2 position.

Select “INLINE SETTING” and press the [ENTER]

key.

The INLINE SETTING menu will open.

Enter a terminal number for IP ADDRESS 4 from (0 -

254) for the master and then carry out the

programming for other INLINE SETTING items and

press the [ENTER] key. The window for the creation of

the master list will open.

Enter the terminal number (1 - 254) for the master in

the IRC system and press the [ENTER] key. The

machine number line will appear.

Enter the machine number (1 - 999999) that

corresponds to the master’s entered terminal number

and press the [ENTER] key.

Repeat steps 4 to 5 for all satellites in the IRC system.

Press the [CA/AT] key to complete the master list.

(When the back-up master is enabled, the “BMA

MACHINE” line will appear to enter the machine

number (see page 31). To return to the PGM2 mode

menu, press the [CANCEL] key.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 60 61

No comments

Sharp UP-600 User Manual Page 29